Resonant-interaction-induced Rydberg antiblockade and its applications

Different from the conventional Rydberg antiblockade (RAB) regime that either requires weak Rydberg-Rydberg interaction (RRI), or compensates the RRI-induced energy shift by introducing off-resonant interactions, we show that RAB regime can be achieved by resonantly driving the transitions between ground state and Rydberg state under strong RRI. The Rabi frequencies are of small amplitude and time-dependent harmonic oscillation, which plays a critical role for the presented RAB. The proposed unconventional RAB regime is used to construct high-fidelity controlled-Z (CZ) gate and controlled-not (CNOT) gate in one step. Each atom requires single external driving. And the atomic addressability is not required for the presented unconventional RAB, which would simplify experimental complexity and reduce resource consumption.     

Stable blow-up dynamics in the -critical and -supercritical generalized Hartree equation

We study stable blow-up dynamics in the generalized Hartree equation with radial symmetry, which is a Schrödinger-type equation with a nonlocal, convolution-type nonlinearity: First, we consider the -critical case in dimensions and obtain that a generic blow-up has a self-similar structure and exhibits not only the square root blowup rate , but also the log-log correction (via asymptotic analysis and functional fitting), thus, behaving similarly to the stable blow-up regime in the -critical nonlinear Schrödinger equation. In this setting, we also study blow-up profiles and show that generic blow-up solutions converge to the rescaled , a ground state solution of the elliptic equation . We also consider the -supercritical case in dimensions . We derive the profile equation for the self-similar blow-up and establish the existence and local uniqueness of its solutions. As in the NLS -supercritical regime, the profile equation exhibits branches of nonoscillating, polynomially decaying (multi-bump) solutions. A numerical scheme of putting constraints into solving the corresponding ordinary differential equation is applied during the process of finding the multi-bump solutions. Direct numerical simulation of solutions to the generalized Hartree equation by the dynamic rescaling method indicates that the is the profile for the stable blow-up. In this supercritical case, we obtain the blow-up rate without any correction. This blow-up happens at the focusing level , and thus, numerically observable (unlike the -critical case). In summary, we find that the results are similar to the behavior of stable self-similar blowup solutions in the corresponding settings for the nonlinear Schrödinger equation. Consequently, one may expect that the form of the nonlinearity in the Schrödinger-type equations is not essential in the stable formation of singularities.     

Multiphase Flow Regime Characterization and Liquid Flow Measurement Using Low-Field Magnetic Resonance Imaging

Multiphase flow metering with operationally robust, low-cost real-time systems that provide accuracy across a broad range of produced volumes and fluid properties, is a requirement across a range of process industries, particularly those concerning petroleum. Especially the wide variety of multiphase flow profiles that can be encountered in the field provides challenges in terms of metering accuracy. Recently, low-field magnetic resonance (MR) measurement technology has been introduced as a feasible solution for the petroleum industry. In this work, we study two phase air-water horizontal flows using MR technology. We show that low-field MR technology applied to multiphase flow has the capability to measure the instantaneous liquid holdup and liquid flow velocity using a constant gradient low flip angle CPMG (LFA-CPMG) pulse sequence. LFA-CPMG allows representative sampling of the correlations between liquid holdup and liquid flow velocity, which allows multiphase flow profiles to be characterized. Flow measurements based on this method allow liquid flow rate determination with an accuracy that is independent of the multiphase flow profile observed in horizontal pipe flow for a wide dynamic range in terms of the average gas and liquid flow rates.     

Physicochemical Interaction of ZnO Fine Particles with 5‐Mono‐(4‐carboxyphenyl)‐10,15,20‐Triphenylporphyrin

This study deals with an investigation on the preparation and physicochemical interactions of ZnO nanoparticles with acid functionalized porphyrin [5‐mono‐(4‐carboxyphenyl)‐10,15,20‐triphenylporphyrin (CPTPP)] for photovoltaic applications in a detailed manner. Zinc acetate and sodium hydroxide were used as the starting materials for the synthesis of ZnO nanoparticles at 60 °C in an alcoholic medium. The freshly prepared fine particles were then functionalized with CPTPP. Both the virgin and pregnant ZnO particles were characterized by using UV‐Visible spectrophotometry (UV), fluorescence emission (PL), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The band gap energy obtained for ZnO particles, having a value of 3.47 eV, shows significant quantum confinement effect and enhanced photophysical activity. FTIR analysis of the doped ZnO nanostructures showed the presences of some chemical species. SEM analysis revealed a clear change in the surface morphologies of undoped ZnO. The average crystallite size of nanoparticles, calculated from XRD peaks, was found in the nano regime. The lattice parameters calculated for ZnO nanocrystals were also found in good agreement with those given in the literature. From the enhancement in the red shift of the UV‐Vis spectra, it is concluded that hybridization of acid functionalized porphyrin can cause a significant expansion in the total absorption region of ZnO semiconductor for photovoltaic applications.     

Microgravity flow regime data and analysis

To utilize the advantageous properties of two-phase flow in microgravity applications, the knowledge base of two-phase flow phenomena must be extended to include the effects of gravity. In the experiment described, data regarding the behavior of two-phase flow in a conduit under microgravity conditions (essentially zero gravity) are explored. Of particular interest, knowledge of the void fraction of the gas and liquid in a conduit is necessary to develop models for heat and mass transfer, pressure drop, and wall shear. An experiment was conducted under reduced gravity conditions to collect data by means of a capacitance void fraction sensor and high speed visual imagery. Independent parameters were varied to map the flow regime regions. These independent parameters include gas and liquid volumetric flow rates and saturation pressures. Void fraction measurements were taken at a rate of 100 Hz with six sensors at two locations along the conduit. Further, statistical parameters were developed from the void fraction measurements. Statistical parameters such as variance, signal-to-noise ratio, half height value, and linear area difference were calculated and found to have characteristics allowing flow regime identification.     

Thermoelastic stresses in SiC single crystals grown by the physical vapor transport method

A finite element-based thermoelastic anisotropic stress model for hexagonal silicon carbide polytype is developed for the calculation of thermal stresses in SiC crystals grown by the physical vapor transport method. The composite structure of the growing SiC crystal and graphite lid is considered in the model. The thermal expansion match between the crucible lid and SiC crystal is studied for the first time. The influence of thermal stress on the dislocation density and crystal quality is discussed. The project supported by the National Natural Science Foundation of China (10472126) and the Knowledge Innovation Program of Chinese Academy of Sciences. The English text was polished by Keren Wang     

“Frictionless” and “frictional” ThermoElastic Dynamic Instability (TEDI) of sliding contacts

Recently, we found that a new form of coupled instability, named ThermoElastic Dynamic Instability (TEDI), can occur by interaction between frictional heating and the natural dynamic modes of sliding bodies. This is distinct from the classical dynamic instabilities (DI) which is produced by an interaction between the frictional forces at the sliding interface and the natural modes of vibration of the bodies if the friction coefficient is sufficiently high, and also from ThermoElastic Instability (TEI), which is due to the interaction of frictional heating and thermal expansion, leading for example to low pitched brake noise above some critical speed. This result was relative to an highly idealized system, comprising an elastic layer sliding over a rigid plane including both dynamic and thermoelastic effects, but neglecting shear waves at the interface due to frictional tractions (from which the denomination “frictionless TEDI”). We demonstrate here that including these shear waves destabilizes both the shear and dilatational vibration modes of the system at arbitrarily small friction coefficients and speeds, where DI and TEI are predicted to be stable. A detailed study of the new modes and transient simulations show that for low pressures and high speed, the system tends towards the results of the previous model (“frictionless TEDI”), i.e. the tendency to a state in which the layer bounces over the plane, with alternating periods of sliding contact and separation. In the case of low speeds and high pressures, viceversa, the system is dominated by the modes near the resonance of the shear and dilatational modes, with a resulting complex behaviour, but generally leading to stick-slip regimes, reducing the jumping mode of “frictionless TEDI”, because stick reduces or stops frictional heating production.     

Regime diagram of the development of long-wave near-wall disturbances in a hypersonic boundary layer

A regime diagram of the development of slow near-wall disturbances induced by an unsteady self-induced pressure perturbation in a hypersonic boundary layer is constructed for a disturbance wavelength greater than the boundary layer thickness. It is shown that the main factors shaping the perturbed flow are the gas enthalpy near the body surface, the intensity of the viscous-inviscid interaction, and the nature (sub- or supersonic) of the main part of the boundary layer. Nonlinear boundary-value problems are formulated for regimes in which the near-wall boundary layer region plays a decisive role. Numerical and analytical solutions are obtained in the linear approximation. It is shown that intensification of the viscous-inviscid interaction or an increase in the role of the supersonic main region of the boundary layer impart generally supersonic properties to the main part of the boundary layer, i.e. the upstream propagation of the disturbances is damped and the disturbance growth downstream becomes more intense. Damping of the viscous-inviscid interaction and an increase in the role of the subsonic main part of the boundary layer have the opposite effect. Surface cooling increases the effect of the main part of the boundary layer on the formation of pressure disturbances and surface heating leads to an increase in the effect of the near-wall boundary layer region. It is also shown that for the regimes considered disturbances propagate in a direction opposite to that of the free stream from the turbulent flow region located downstream of the local disturbance development region.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 59–71. Original Russian Text Copyright © 2004 by Bogolepov and Neiland.     

Sustained photon pulse revivals from inhomogeneously broadened spin ensembles

A very promising recent trend in applied quantum physics is to combine the advantageous features of different quantum systems into what is called “hybrid quantum technology”. One of the key elements in this new field will have to be a quantum memory enabling to store quanta over extended periods of time. Systems that may fulfill the demands of such applications are comb‐shaped spin ensembles coupled to a cavity. Due to the decoherence induced by the inhomogeneous ensemble broadening, the storage time of these quantum memories is, however, still rather limited. Here we demonstrate how to overcome this problem by burning well‐placed holes into the spectral spin density leading to spectacular performance in the multimode regime. Specifically, we show how an initial excitation of the ensemble leads to the emission of more than a hundred well‐separated photon pulses with a decay rate significantly below the fundamental limit of the recently proposed “cavity protection effect”.

     

An inverse dispersed multiphase flow model for liquid production rate determination

The aim of this study is to develop a model for the determination of the superficial velocities in horizontal and slightly inclined oil–water pipe flow conditions by using pressure gradient and mixture density information. In this article an inverse model is suggested for a dispersion of oil in water and of water in oil. This approach permits to select dispersed flow conditions from a set of experimental data, and uses a new hybrid model for the effective viscosity. A set of 310 oil–water experimental data points collected on an experimental set-up of length L = 15 m and diameter D = 8.28 cm at various (slight) orientations is used to validate the inverse method. The comparison between model reconstructions and measured flow velocities show a reasonable agreement.